国产午夜精品久久久久婷婷-国产午夜精品美女免费大片-国产午夜精品一区二区三区不卡-国产午夜剧场-人与动物毛片-人与动物一级黄色片

 

Atomic ash, as an efficient surface repair material, is widely used in fields such as automobiles, machinery, and furniture. Before use, basic treatment should be done: first, remove impurities such as oil stains, rust, dust, etc. from the surface to be repaired to ensure that the surface is dry and smooth; If there are deep depressions in the base layer, it is recommended to use filling materials as a base first to avoid applying atomic ash too thick in a single application.

 

In the blending process, attention should be paid to precise proportion. According to the product instructions, mix the main ash and curing agent thoroughly until the color is uniform. The blending amount should be used up within 20 minutes to avoid waste caused by curing failure. When applying, the cross scraping method should be used to ensure a tight bond between the material and the base layer. The thickness of each layer should not exceed 2mm. If thick coating is required, it should be applied in layers, and the interval between each layer should wait for the previous layer to fully cure.

 

Safety protection is crucial, and protective gloves, masks, and goggles must be worn during construction to maintain good ventilation in the work environment; Atomic ash and curing agents are flammable materials and should be kept away from sources of ignition and direct sunlight; When storing, it should be sealed and placed in a cool and dry place, away from children's contact.

 

Changxing Baodi Environmental Protection Technology always takes "safety and efficiency" as its core. If you need technical support, you can contact a professional team at any time to ensure that every construction is standardized and worry free.